BESS for large scale Data Center 1-3MW
Specifications
| Maximum Photovoltaic Input Power |
400KW |
| Rated Current |
606A |
| Rated Input Voltage |
3W+N+PE，380/400V |
| Rated Frequency |
50Hz/60Hz |
|
Voltage Range |
DC580V~DC900V |
| DC Channel |
5 |
|
Single Channel Rated Current |
170A |
|
Rated Power |
500kW |
|
Rated Grid Voltage |
3W+N+PE, 380V/400V |
|
Grid Voltage Range |
-15%~+10% |
| Rated Grid Frequency |
50Hz/60Hz |
|
Grid Frequency Range |
±2Hz |
|
Output Current Distortion |
≤ 3% (rated power) |
|
DC Component |
<0.5%In |
|
Power Factor Range |
-0.9~+0.9 |
|
AC Specifications |
500kW |
| Maximum Output Power |
525kV A |
| Rated Output Voltage |
3W+N+PE, 380/400V |
| Output Voltage Distortion |
3% |
| Rated Frequency |
50Hz/60Hz |
| Overload Capacity |
105%]: continuous operation; (105%-120%]: 10 min; 120%): 1 min |
| Battery Type |
Lithium iron phosphate |
| Number of Battery Cabinets | 5 |
| Battery System Capacity |
1075.2kWh |
| Rated Run Time | 2h (Runtime adjustable by modifying the number of battery modules) |
| Cycle Life |
6.000 times (0.5C @ 25°C charge and discharge @ 90% DOD, EOL 80%) |
| Dimensions (WDH) (mm) |
6058*2438*2591 |
| Net weight |
16000Kg |
| Standalone Mode |
Integrated Isolation Transformer |
| Grid-Connected & Off-Grid Switching Device |
STS Electronic Switch |
| Protection Standard | IP54 Protection Standard for Outdoor Equipment |
| Operating Temperature Range |
-20°C to 55°C (Performance derates above 45°C) |
| Relative Humidity (Non-Condensing) |
0% RH – 95% RH (non-condensing) |
| Temperature Control Method |
Battery Compartment: Air Conditioning Cooling |
| Maximum Operating Altitude |
2.000m at 45°C |
| Display Screen |
Touch Screen |
| External Communication Interface |
RS485、LAN |
| Communication Protocol |
Modbus-RTU、Modbus-TCP |
-
BESS for Data Center
This product is a tower UPS for medium-sized and large-sized data centers and critical power supply scenarios. This series is an online double conversion UPS and features high reliability, up to 96% efficiency, and high power density.
-
BESS for Telecom system
In the era of 5G, the form, power consumption, site location, and coverage of mobile communication distributed base stations are constantly being upgraded, requiring higher bandwidth, lower latency, and more connections.To adapt to these characteristics, more reliable and economi- cal power supply solutions are needed for new base station. This product uses LFP battery cell so that the product contains features such as: good safety, long lifespan, small resistance, high efficiency of charge/discharge and so on. This battery box can be used at the scenarios of communication power supply and others similar.
